Seamless Gutters for Northwest Rain: What to Know Before You Replace Yours

New seamless aluminum gutter installed on a home

Most homeowners don’t think about their gutters until water is pouring over the edge in the middle of a November storm. By then, the water may already be soaking the fascia, running down the siding and pooling against the foundation. Nobody wants that!

Around Arlington, Stanwood, Camano Island and the rest of Snohomish County, Skagit County and the greater Pacific Northwest, gutters carry a LOT of water during the wet Fall and Winter seasons.

Here’s what we see go wrong, and how we fix it.

What Gutters Protect

  • Your roof edge and fascia boards
  • Siding and trim
  • The ground along your foundation
  • Landscaping and walkways

Common Problems We See In The Rainy Season

  • Clogged gutters, especially under firs and cedars that drop needles all year
  • Leaking joints and corners on sectional gutters
  • Loose or sagging gutters pulling away from the roofline
  • Downspouts that dump water right next to the house, or don’t drain at all

If you’ve had leaves and needles packed in your gutters this fall, check for water stains on the fascia and siding below them. That’s where the damage starts.

Why Seamless Gutters

Seamless gutter forming machine set up on a job site

Sectional gutters come in short pieces joined together, and every joint is a spot that can leak. Seamless gutters are formed on site from a single coil of aluminum, so each run is one continuous piece with joints only at the corners.

We bring our gutter machine to the job and form each run to the exact length of your house. That means a better fit and fewer seams that could fail.

  • Seamless 5″ and 6″ aluminum gutters
  • Custom-made on site for each run
  • New downspouts placed where the water needs to go
  • Gutter replacement on existing homes and new construction

On homes with bigger roof areas or steeper pitches, 6″ gutters carry noticeably more water. We’ll tell you which size makes sense for your house.

Gutters and Roof Replacement Go Together

If you’re planning a roof replacement, it’s often the right time to replace the gutters too. The old gutters usually have to come off to install new drip edge properly anyway, and it gives us a chance to check and repair the fascia behind them. We also do gutter replacements on their own when the roof still has life left.

Seamless Gutter Installation Near You

Orlando’s Pro Roofing & Gutters installs seamless gutters in Arlington, Stanwood, Camano Island, Marysville, Smokey Point and the surrounding area. Call 425-397-1985 or request a free estimate online.